Welcome to Zhejiang Dobest Power Tools Co., Ltd.
Cleaning the lawn mower and changing the oil
Apr 07,2021
The lawn mower is cleaned every 25 hours, and the internal dirty should be more frequent.
Clean with kerosene or washing liquid and clean water, squeeze it to dry, then soak in engine oil, squeeze into excess engine oil to install. If "DON NOT OIL" is printed, there is no need to add engine oil.
Do not use petroleum solvents such as kerosene to clean the paper core. Because it may cause the paper core to deteriorate, do not put engine oil on the paper core, and do not use compressed air to clean or dry the paper core.
The oil should be changed after the new machine is operated for the first time for 5 hours, and the oil should be changed every 40 hours after use.
To change the oil, you can drain the oil in the oil drain hole of the oil pan at the lower part of the cutter head, or open the oil filler port and tilt the machine to the left to drain the oil (the air filter must be at the top). No matter how you put it, you should immediately drain the oil after the ignition wire of the spark plug is removed, and re-apply suitable engine oil to the specified scale after the ignition wire of the spark plug is removed.
Note: The discharged waste engine oil should be kept well and handed over to the waste oil recycler so as not to pollute the environment.
Related News
Contact Information
Copyright © 2025 Zhejiang Dobest Power Tools Co., Ltd. All Rights Reserved. Powered by：CEglobal